Fire claddings for steel beams, timber elements and ventilation ducts in Würselen. F30, F90 and higher — approved Promatect, Knauf fire systems.
System selection in Würselen depends on the bauteil and the visibility. Visible steelwork in foyers often get intumescent coatings — they meet F-rating without altering geometry. industrial halls use Promatect plates for cost and speed.
What we install in Würselen depends on the structure, appearance and construction phase.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Würselen. Specified per approval in Würselen.
Intumescent coating — for visible steelwork, where boards would interfere visually. Audit-ready in Würselen.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Würselen industrial settings. Specified per approval in Würselen.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Würselen. Specified per approval in Würselen.
Every cladding with approval and conformity declaration.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
EI ratings for claddings — parallel to DIN, EU-recognised.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Würselen.
For special-use buildings, in maintenance plans, at renovation completion — yes. Documentation in Würselen provided.
Survey in Würselen → board order → install. Documentation audit-ready.
