Certified T30, T60 and T90 fire doors for industry, commercial and residential buildings. Planning, supply, installation, retrofit and maintenance from a single source — with full documentation per DIN 4102, EN 1634 and EN 13501-2.
A fire door is a fire-rated closure within a wall opening designed to contain the spread of fire and smoke for a defined period. Unlike standard doors, fire doors are tested and approved as a complete assembly — door leaf, frame, hardware and seals form an inseparable unit that was tested as a whole in a standard fire test to EN 1634-1. Every component contributes to the fire-resistance rating; a single non-approved swap — a different closer, a missing seal — invalidates the entire approval. Smoke-control doors (RS per DIN 18095) limit the passage of smoke but not heat; they are mandated wherever escape routes must stay smoke-free. Emergency exit hardware to EN 1125 enables fast escape via a horizontal push bar that opens with a single motion — a prerequisite for assembly venues and spaces with non-regular users. Both functions can be combined with fire resistance — for example as a T30-RS panic door in an office stairwell, or as a T90-RS door between two fire compartments of a production hall. The specification is always governed by the fire protection concept for the building and by the applicable state building code — in North Rhine-Westphalia the BauO NRW, plus the special construction ordinances for assembly venues, hospitals, high-rises and industrial buildings.
The minute rating describes how long the door withstands fire and heat in the standard test. The German DIN 4102 classifies T30 / T60 / T90; the European EN 13501-2 classifies EI₂30 / EI₂60 / EI₂90.
The most common specification. For escape and rescue routes, corridor walls, plant rooms, underground car parks and apartment entrance doors.
T30 door →Special buildings and protected areas with elevated fire load — industry, archives, server rooms, transformer stations.
T60 door →High-risk areas and fire walls per § 28 BauO NRW. Industry, petrol stations, warehouses with hazardous substances.
T90 door →Every opening is different — dimensions, escape direction, appearance, fire load. We specify the configuration that matches your fire protection concept.
Standard solution for openings up to 1,250 mm wide. Quick availability, lowest cost.
For wide openings, transport routes and escape routes with high occupancy.
Tested with fire-rated glazing EI₂30 / EI₂60 — for more daylight in corridors and stairwells.
Robust, moisture-resistant, low maintenance. Standard for industry, plant rooms and car parks.
Slim profiles, premium appearance. Ideal for representative areas and facades.
Residential and high-end commercial use. Custom finishes, CPL, real-wood veneer.
From initial planning to annual maintenance — one contact, one responsibility, one set of records.
Protection goals, door types, frames, hardware, escape and panic solutions — on site or from your drawings.
Hörmann, Novoferm, Teckentrup, Schüco — with all required approvals and test certificates.
Installation by trained specialists, including frames, hardware, seals and an inspection record.
Replacing uncertified doors with approved systems — including in occupied buildings.
Failed closers, warped leaves, missing seals — we replace on schedule and document every step.
Regular maintenance including log book, defect report and scheduled follow-up.
Compartment separation, workshop gates, plant rooms, transformer stations.
Fire walls, loading bays, high-bay closures, hazardous-materials storage.
Corridors, operating theatres, patient rooms with smoke control and self-closing.
Escape and rescue routes, stairwells, plant rooms and server areas.
Guest-room doors with T30-RS, kitchen separation, storage and plant.
Apartment entrance doors, basements and underground parking per state building codes.
The range is wide. The main drivers are type, dimensions, frame, hardware and whether glazing is fitted.
Prices are indicative including VAT. A binding quote follows an on-site survey or drawings review.
Trained installers for Hörmann, Novoferm, Teckentrup, Schüco — with current training records.
Service area covers all of North Rhine-Westphalia — short travel times, fast response for maintenance.
Planning, supply, installation, maintenance — one contact, one log book, one responsibility.
Installation records, inspection log books and approval copies — digital and available on request via project portal.
Standard for corridors, stairwells, plant rooms.
For fire walls and high-risk areas.
Smoke tightness without fire-resistance rating.
Doors held open in daily use, closing automatically in a fire.
Inspection, maintenance and documentation per DIN 14677.
When fire doors are legally mandated.
30 minutes of fire resistance, installed to standard. T30 is the most common fire-door class: corridors, stairwells, apartment entrances, plant rooms. Classified EI₂30 to EN 13501-2 (national T30 to DIN 4102-5) — tested as a complete assembly of leaf, frame, hardware and seals.
01b90 minutes of fire resistance for maximum security. T90 doors are required in fire walls, high-rise stairwells, industrial buildings, server rooms and special-construction buildings. Classified EI₂90 to EN 13501-2 — three times the protection of T30.
01dCompliant in the existing stock — even during live operations. An official requirement, a fire protection report or a defects list after an inspection — we handle the entire process: on-site survey, planning, supply, installation and documentation.
Send us your drawings or schedule an on-site survey. We respond within one business day with a quote.