30 minutes of fire resistance, installed to standard. T30 is the most common fire-door class: corridors, stairwells, apartment entrances, plant rooms. Classified EI₂30 to the applicable proofs of usability (national T30 to the applicable proofs of usability) — tested as a complete assembly of leaf, frame, hardware and seals.
A T30 fire door withstands fire and heat in the standard fire test for at least 30 minutes. The test covers integrity (E), insulation (I) and mechanical resistance in accordance with the applicable proofs of usability. Classification is T30 to the applicable proofs of usability or EI₂30 to the applicable proofs of usability — both designations are recognised in Germany. A T30 door is self-closing and forms — together with frame, hardware and seals — a single approved assembly. With the suffix "-RS" it is additionally smoke-tight in accordance with the applicable proofs of usability — required wherever escape routes must remain free of smoke.
The choice depends on appearance, fire load and installation context. We recommend based on your fire protection concept.
Standard, robust, economical. First choice for residential, commercial, plant rooms and underground car parks.
Premium appearance — for residential, office and representative areas. CPL or real-wood veneer.
Light, slim profiles, high-end appearance. For special applications and façade interfaces.
Fire-rated glazing EI₂30 — for more daylight in corridors and stairwells.
Standard for openings up to 1,250 mm wide. Quick availability, lowest cost.
For wide openings and transport routes — with closing-sequence control.
Prices are indicative including VAT. A binding quote follows an on-site survey or a drawings review.
We cover every typical building type — from residential to industrial complexes with hundreds of components per site.
Multi-occupancy residential, offices, commercial — separation of escape routes from adjoining uses.
Per BauO NRW depending on building class — usually as T30-RS in multi-storey residential blocks.
Boiler room, service entry room, lift shaft — separation from rooms with elevated fire load.
Between apartments, commercial units and common areas — defined in the fire protection concept and the state building code.
Transition from the stairwell to the basement — typically T30-RS.
Access from the underground car park to the stairwell — covered by the special-construction code (GarStVO).
The approval applies only in the tested wall combination — concrete, masonry or approved drywall. Substrate check before installation.
The frame is part of the approval — no free swap. We select the variant tested for the wall.
Proper installation of the joint per the manufacturer's instructions — otherwise the approval is invalid.
Every T30 door requires a valid approval (Z-number) and a permanent data plate — readable after installation.
Installation only by certified contractors with current training records — otherwise insurance cover lapses.
Consulting, supply, installation and maintenance — one contact, one responsibility.
Aachen to Bielefeld, Lower Rhine to Sauerland — survey usually within five working days.
No subcontractors. Warranty work and maintenance always trace back to the same people.
We schedule appointments proactively. Inspection record for the fire authority comes with every visit.
Manufacturer, configuration, frame, hardware — based on your fire protection concept and the installation context.
Brand-agnostic — all common systems with approval, test certificate and data plate.
With current manufacturer training records — a precondition for valid approval.
Replacement of uncertified doors — including in occupied buildings.
Regular inspection with logbook, defect record and scheduled follow-up.
Pillar page covering all classes, configurations and standards.
For fire walls and high-risk areas.
Replacement in the existing stock, often after a defects list.
Smoke-tightness without a fire-resistance rating.
Inspection and maintenance in accordance with the applicable proofs of usability.
When fire doors are legally mandated.
Need a T30 door? Send us measurements or drawings — we respond within one business day with a no-obligation quote.
