Every cladding with approval and conformity declaration.
Fire claddings are board constructions that protect steel beams from failure for 30 to 120 minutes. The cladding turns an bare duct into an F30/F90-compliant component.
Fire-protective claddings in Baesweiler
Load-bearing structures keep their fire-resistance rating through approved board claddings, fire-protective coatings or mineral-wool build-ups — installed in Baesweiler and Region Regierungsbezirk Köln.
What fire cladding does.
Cladding types for Baesweiler.
What we install in Baesweiler depends on the structure, appearance and construction phase.
- 01
Duct cladding
Promatect-L or equivalent — fully enclosing the duct, per approval, in Baesweiler industrial settings.
- 02
Sprayed plaster
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Audit-ready in Baesweiler.
- 03
Steel beam F30/F90
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam.
- 04
Shaft cladding
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Baesweiler. Audit-ready in Baesweiler.
- 05
Fire-protective coating
Intumescent coating — for visible steelwork, where boards would interfere visually. Documented in the property log in Baesweiler.
- 06
Timber beam protection
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Baesweiler. Audit-ready in Baesweiler.
Where we cladding in Baesweiler.
- Stairwell structure
- Steel staircases with F30 cladding — in stock, new build, as renovation measure.
- Duct lines
- Ventilation ducts in school, care, office buildings in Baesweiler — F90 cladding all-round.
- Timber ceiling
- Stock cladding for timber-beam ceilings — F30/F60 underside in Baesweiler stock.
- Lift shaft
- F90 shaft wall with cladding — for stock renovation, top-up storeys, new build in Baesweiler.
- Hall load-bearing
- Steel beams in logistics and production halls in Baesweiler — F30 to F90 per concept, audit-ready.
- Service shaft
- Heating, sewage, ventilation shaft — F90 cladding with inspection openings.
Standards.
- abZBuilding-authority approval
- DIN 4102-4Components under fire
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
- EN 13501-2EU classification
EI ratings for claddings — parallel to DIN, EU-recognised.
- MLARCable line directive
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
What fire claddings cost in Baesweiler.
Heavily dependent on component and area — fixed price after survey.
- from €60/mSteel beam F30 board claddingPer linear metre, three-sided
- €120 – €250/m²Duct cladding F90All-round, in line
- from €80/m²Shaft wall F90Lift shaft / service
- Fixed priceTimber-beam upgradeLump-sum after walkthrough in Baesweiler
- On requestFire-protective coatingPer m² visible area, intumescent
Fixed offer after survey in Baesweiler.
Fire claddings in the region Regierungsbezirk Köln.
Claddings in Baesweiler — FAQ.
Depends on F-rating, appearance and visibility. Boards for hidden, coating for visible work.
Plan claddings for Baesweiler.
Survey in Baesweiler → board order → install. Documentation audit-ready.