Cladding steelwork, lining ventilation ducts, retrofitting load-bearing structures in Vettweiß. Boards, coatings, mineral-wool systems.
Unlike fire doors or seals, claddings don't form compartments — they preserve components. The steel beam, the duct, the timber stays functional under fire for the defined duration. In Vettweiß, this matters most in hall structures where a beam collapse means a section collapse.
What we install in Vettweiß depends on the structure, appearance and construction phase.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Documented in the property log in Vettweiß.
Intumescent coating — for visible steelwork, where boards would interfere visually.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam. Documented in the property log in Vettweiß.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Vettweiß industrial settings.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Vettweiß.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Vettweiß.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
EI ratings for claddings — parallel to DIN, EU-recognised.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
Every cladding with approval and conformity declaration.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Vettweiß.
Decades — as long as the component stands, until mechanical damage. Inspection every 5 years recommended.
Survey in Vettweiß → board order → install. Documentation audit-ready.
