Cladding steelwork, lining ventilation ducts, retrofitting load-bearing structures in Versmold. Boards, coatings, mineral-wool systems.
Fire claddings are board constructions that protect ventilation ducts from load loss for 30 to 120 minutes. The cladding turns an unprotected steel beam into an properly rated structural element.
What we install in Versmold depends on the structure, appearance and construction phase.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Versmold industrial settings. Specified per approval in Versmold.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Versmold.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Versmold. Documented in the property log in Versmold.
Intumescent coating — for visible steelwork, where boards would interfere visually.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
Every cladding with approval and conformity declaration.
EI ratings for claddings — parallel to DIN, EU-recognised.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Versmold.
Decades — as long as the component stands, until mechanical damage. Inspection every 5 years recommended.
Survey in Versmold → board order → install. Documentation audit-ready.
