Load-bearing structures keep their fire-resistance rating through approved board claddings, fire-protective coatings or mineral-wool build-ups — installed in Neuenkirchen and Region Reg.-Bez. Münster.
Fire claddings are board constructions that protect load-bearing components from heating for 30 to 120 minutes. The cladding turns an unprotected steel beam into an properly rated structural element.
What we install in Neuenkirchen depends on the structure, appearance and construction phase.
Intumescent coating — for visible steelwork, where boards would interfere visually. Documented in the property log in Neuenkirchen.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Neuenkirchen.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Neuenkirchen industrial settings.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam. Specified per approval in Neuenkirchen.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Neuenkirchen.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
Every cladding with approval and conformity declaration.
EI ratings for claddings — parallel to DIN, EU-recognised.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Neuenkirchen.
For special-use buildings, in maintenance plans, at renovation completion — yes. Documentation in Neuenkirchen provided.
Survey in Neuenkirchen → board order → install. Documentation audit-ready.
