EI ratings for claddings — parallel to DIN, EU-recognised.
Fire claddings are board constructions that protect steel beams from heating for 30 to 120 minutes. The cladding turns an combustible timber into an F30/F90-compliant component.
Fire-protective claddings in Goch
Load-bearing structures keep their fire-resistance rating through approved board claddings, fire-protective coatings or mineral-wool build-ups — installed in Goch and Region Reg.-Bez. Düsseldorf.
What fire cladding does.
Cladding types for Goch.
What we install in Goch depends on the structure, appearance and construction phase.
- 01
Duct cladding
Promatect-L or equivalent — fully enclosing the duct, per approval, in Goch industrial settings.
- 02
Fire-protective coating
Intumescent coating — for visible steelwork, where boards would interfere visually.
- 03
Timber beam protection
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Goch.
- 04
Sprayed plaster
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Specified per approval in Goch.
- 05
Shaft cladding
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Goch.
- 06
Steel beam F30/F90
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam.
Where we cladding in Goch.
- Duct lines
- Ventilation ducts in school, care, office buildings in Goch — F90 cladding all-round.
- Stairwell structure
- Steel staircases with F30 cladding — in stock, new build, as renovation measure.
- Hall load-bearing
- Steel beams in logistics and production halls in Goch — F30 to F90 per concept, audit-ready. Standard scope in Goch.
- Timber ceiling
- Stock cladding for timber-beam ceilings — F30/F60 underside in Goch stock.
- Service shaft
- Heating, sewage, ventilation shaft — F90 cladding with inspection openings. Standard scope in Goch.
- Lift shaft
- F90 shaft wall with cladding — for stock renovation, top-up storeys, new build in Goch. Standard scope in Goch.
Standards.
- EN 13501-2EU classification
- abZBuilding-authority approval
Every cladding with approval and conformity declaration.
- MLARCable line directive
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
- DIN 4102-4Components under fire
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
What fire claddings cost in Goch.
Heavily dependent on component and area — fixed price after survey.
- from €60/mSteel beam F30 board claddingPer linear metre, three-sided
- €120 – €250/m²Duct cladding F90All-round, in line
- from €80/m²Shaft wall F90Lift shaft / service
- Fixed priceTimber-beam upgradeLump-sum after walkthrough in Goch
- On requestFire-protective coatingPer m² visible area, intumescent
Fixed offer after survey in Goch.
Claddings in Goch — FAQ.
Decades — as long as the component stands, until mechanical damage. Inspection every 5 years recommended.
Plan claddings for Goch.
Survey in Goch → board order → install. Documentation audit-ready.