Load-bearing structures keep their fire-resistance rating through approved board claddings, fire-protective coatings or mineral-wool build-ups — installed in Dinslaken and Region Reg.-Bez. Düsseldorf.
Fire claddings are board constructions that protect load-bearing components from load loss for 30 to 120 minutes. The cladding turns an unprotected steel beam into an properly rated structural element.
What we install in Dinslaken depends on the structure, appearance and construction phase.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam. Specified per approval in Dinslaken.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Dinslaken.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Dinslaken industrial settings.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary.
Intumescent coating — for visible steelwork, where boards would interfere visually. Specified per approval in Dinslaken.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Dinslaken. Documented in the property log in Dinslaken.
EI ratings for claddings — parallel to DIN, EU-recognised.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
Every cladding with approval and conformity declaration.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Dinslaken.
Yes — F30/F90 retrofit-able, cladding around existing components, in occupied rooms in Dinslaken.
Survey in Dinslaken → board order → install. Documentation audit-ready.
