Moers has steel halls, ventilation runs and load-bearing structures that must keep their function under fire. We install, renovate, document audit-ready.
Fire claddings are board constructions that protect timber elements from failure for 30 to 120 minutes. The cladding turns an unprotected steel beam into an properly rated structural element.
What we install in Moers depends on the structure, appearance and construction phase.
Intumescent coating — for visible steelwork, where boards would interfere visually.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Moers.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Audit-ready in Moers.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Moers. Specified per approval in Moers.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Moers industrial settings. Audit-ready in Moers.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
EI ratings for claddings — parallel to DIN, EU-recognised.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
Every cladding with approval and conformity declaration.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Moers.
Yes — F30/F90 retrofit-able, cladding around existing components, in occupied rooms in Moers.
Survey in Moers → board order → install. Documentation audit-ready.
