Fire claddings for steel beams, timber elements and ventilation ducts in Xanten. F30, F90 and higher — approved Promatect, Knauf fire systems.
Documentation is mandatory. Every cladding position needs photographic record before close-out. We deliver this with the work — so the Xanten consultant can sign off without asking for product certs we don't have.
What we install in Xanten depends on the structure, appearance and construction phase.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Xanten industrial settings.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Xanten. Audit-ready in Xanten.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Xanten. Audit-ready in Xanten.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam. Documented in the property log in Xanten.
Intumescent coating — for visible steelwork, where boards would interfere visually.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Specified per approval in Xanten.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
Every cladding with approval and conformity declaration.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
EI ratings for claddings — parallel to DIN, EU-recognised.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Xanten.
Decades — as long as the component stands, until mechanical damage. Inspection every 5 years recommended.
Survey in Xanten → board order → install. Documentation audit-ready.
