Fire-rated gates in Rhede

Sliding, folding, sectional and roller gates with T30/T60/T90 in Rhede — supply, install, maintain, emergency service. Hörmann, Teckentrup, Novoferm.

Hörmann · Teckentrup · NovofermSupply & installEmergency in Rhede
Rhede

What a fire gate delivers.

When a gate fails in Rhede, the failure mode matters: counterweight ropes each have different replacement cycles. Sectional gates with HGV-pass duty get track contamination. We carry same-day fixes for the gate brands operating across NRW.

Fire gates for Rhede.

Which build we install in Rhede depends on hall height, wall situation, fire-protection concept and use.

  1. 01

    With personnel door

    Daily passage through the gate — escape door, workshop use, integrated route. Specified per approval in Rhede.

  2. 02

    Roller gate

    Compact, small format — service counters, gate housings, smaller passages in Rhede.

  3. 03

    Sectional gate

    Rolls vertically under the ceiling, with hub mechanics — for HGV passes, workshop access, logistics ramps. Specified per approval in Rhede.

  4. 04

    Folding gate

    When space is tight — folds to both sides, common in stock retrofits and wide passages.

  5. 05

    With drive

    Electric drives for high cycle counts, accessible operation, alarm coupling in Rhede stock. Specified per approval in Rhede.

  6. 06

    Sliding gate

    Logistics classic in Rhede — wall-parallel, T30 or T90, electric or mechanical. Specified per approval in Rhede.

Where fire gates are installed in Rhede.

Gate house
Roller gate with fire function — small, retrofit-friendly, maintainable. Standard scope in Rhede.
High-bay storage
Gates between high-rack zones — high demands, special build, consultant-supervised.
Workshop
Gate between workshop and storage — T30 or T90 with personnel door, retrofit-friendly.
Logistics hall
T30/T90 gates between storage zones — high cycle, alarm-linked, in maintenance contract.
Underground parking
Gate between parking and stairwell — mandatory and concept-defined in Rhede. Standard scope in Rhede.
Production
Compartment gates in production halls — fire-resistant, chemical-resistant, with drive in Rhede industry.

Standards.

  • DIN EN 16005
    Power-operated doors

    Safety requirements for driven gates — closing edge, light grid, obstruction stop.

  • abZ
    Building approval

    Every gate with approval number and audit-ready documentation — in Rhede too.

  • EN 13501-2
    EU classification

    EI ratings parallel to DIN — required in new build and EU projects.

  • DIN 4102-5
    Fire resistance

    T30/T60/T90 classification for gates in Rhede.

What a fire gate costs in Rhede.

Heavily dependent on size, build, drive — fixed price after measurement.

  • from €4,500
    Small T30 sliding gateUp to 3 m wide, manual, fitted
  • €8,000 – €15,000
    Large T30/T90 sliding gateLogistics width, with drive, hold-open
  • €10,000 – €20,000
    Sectional gate T30HGV pass, with drive
  • from €12,000
    T90 with alarm couplingAlarm-linked release
  • Fixed price
    Annual maintenance contract€200–€500 per gate per year

Fixed offer after measurement in Rhede.

Fire gates in Rhede — FAQ.

  • At least annually — to DIN 14677 and manufacturer guidance. Maintenance log, defect report, audit-ready documentation in Rhede.

Have fire gates checked in Rhede.

Book maintenance in Rhede → identify defects → fixed offer for renovation.

Call+49 2861 8114387