Abels Brandschutz
Abels Fire Protection Systems
Specialist Contractor for Structural Fire Protection
Request a Quote

Fire-stop penetration seals in Rhede

Sealing what needs to be sealed in Rhede and Kreis Borken. Cable seals, pipe stops, combined penetrations. Soft, hard or mortar seals.

Request walkthrough☎+49 2861 8114387
Promat · Hilti · WürthExisting & newAudit-ready documentation
Rhede

What a penetration seal achieves.

The right system depends on context. Soft seals handle most wall penetrations in Rhede stock; mortar systems go in for when frequent re-cabling is expected. Combined cable+pipe penetrations need a system that's listed in the manufacturer's range.

Penetration systems for Rhede.

The system depends on opening size, occupancy density and wall type.

  1. 01

    Cable seal in ceiling

    Vertical penetration — usually box-style, accessible from above, expandable for future cables.

  2. 02

    Cable seal in wall

    Classic in Rhede stock: cables through F30/F90 wall, mineral wool with coating or board with collars. Documented in the property log in Rhede.

  3. 03

    Pipe penetration

    Intumescent collar for plastic pipes, mineral wool insulation for steel — system-dependent, per approval, documented in the penetration plan. Specified per approval in Rhede.

  4. 04

    Combined seal

    Cable and pipe in the same opening — Promat combination, Hilti CFS-CT, Würth fire-stop solution. Specified per approval in Rhede.

  5. 05

    Stock documentation

    Take over multi-brand stock in Rhede, consolidate in the penetration plan, prepare for consultant sign-off. Specified per approval in Rhede.

  6. 06

    Duct fire-stop

    Fire damper or duct seal — coordinated with the concept, integrated into the duct line.

Where we install seals in Rhede.

Cable trays
Tray penetrations with box seals or aggregate seals. Standard scope in Rhede.
Duct lines
Fire dampers, duct seals — schools, care, offices in Rhede. Standard scope in Rhede.
Plant rooms
Boiler, distribution, transformer — high penetration density, consultant focus. Standard scope in Rhede.
Riser shafts
Floor-by-floor sealing — renovation, stock, retrofit in Rhede.
Stairwell walls
Compartment boundaries with cable and pipe penetrations — mandatory at every building permit in Rhede.
Stock survey
Take over multi-brand stock in Rhede, inspect, transfer into penetration plan, prepare for authorities.

Standards.

  • MLAR
    Cable line directive

    Governs electrical line routing in fire protection — applies in NRW.

  • DIN 4102-9
    Cable penetration seals

    Defines the S-rating for cable seals in Rhede buildings.

  • abZ
    Building-authority approval

    Every system carries an approval number — we deliver the documentation in Rhede.

  • EN 1366-3
    European classification

    EI rating for penetration seals — used parallel to DIN, EU-recognised.

What penetration seals cost in Rhede.

Ranges depend on opening size, density and system. Fixed quote after walkthrough.

  • from €80
    Small cable penetrationSingle cable, S30 with coating
  • €150 – €400
    Standard wall cable sealMineral wool + coating, medium density
  • €300 – €800
    Combined sealCable and pipe in one opening
  • from €600
    Duct fire-stopFire damper installed
  • Fixed price
    Stock survey & penetration planLump-sum after walkthrough in Rhede

Fixed offer after walkthrough in Rhede.

Penetration seals in the region Reg.-Bez. Münster.

BocholtBorkenBorkenBorkenRaesfeldBorkenHamminkelnWeselIsselburgBorkenSüdlohnBorken

Fire stops in Rhede — FAQ.

  • Yes — as long as each position has an approval and the documentation is consistent. We take over stock brand-neutrally.

Have your seals checked for Rhede.

Call us — we take over the seal stock in Rhede and continue it.

Request walkthrough☎
Call Directly
+49 2861 8114387
Call+49 2861 8114387