Fire claddings for steel beams, timber elements and ventilation ducts in Meckenheim. F30, F90 and higher — approved Promatect, Knauf fire systems.
Fire claddings are coated build-ups that protect ventilation ducts from heating for 30 to 120 minutes. The cladding turns an unprotected steel beam into an properly rated structural element.
What we install in Meckenheim depends on the structure, appearance and construction phase.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Meckenheim.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Meckenheim. Audit-ready in Meckenheim.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Meckenheim industrial settings.
Intumescent coating — for visible steelwork, where boards would interfere visually.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Audit-ready in Meckenheim.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
EI ratings for claddings — parallel to DIN, EU-recognised.
Every cladding with approval and conformity declaration.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Meckenheim.
Decades — as long as the component stands, until mechanical damage. Inspection every 5 years recommended.
Survey in Meckenheim → board order → install. Documentation audit-ready.
