Sliding, folding, sectional and roller gates with T30/T60/T90 in Lünen — supply, install, maintain, emergency service. Hörmann, Teckentrup, Novoferm.
Fire-rated gates are DIN-tested closures for warehouses. They protect escape routes for 30, 60 or 90 minutes — kept open via hold-open devices in normal use, automatically closing on fire alarm, smoke detection or power loss. In Lünen, this is the typical setup for any compartment-dividing gate in production or logistics.
Which build we install in Lünen depends on hall height, wall situation, fire-protection concept and use.
Daily passage through the gate — escape door, workshop use, integrated route.
Compact, small format — service counters, gate housings, smaller passages in Lünen. Specified per approval in Lünen.
Electric drives for high cycle counts, accessible operation, alarm coupling in Lünen stock. Documented in the property log in Lünen.
When space is tight — folds to both sides, common in stock retrofits and wide passages. Specified per approval in Lünen.
Logistics classic in Lünen — wall-parallel, T30 or T90, electric or mechanical. Documented in the property log in Lünen.
Rolls vertically under the ceiling, with hub mechanics — for HGV passes, workshop access, logistics ramps.
T30/T60/T90 classification for gates in Lünen.
EI ratings parallel to DIN — required in new build and EU projects.
Safety requirements for driven gates — closing edge, light grid, obstruction stop.
Every gate with approval number and audit-ready documentation — in Lünen too.
Heavily dependent on size, build, drive — fixed price after measurement.
Fixed offer after measurement in Lünen.
At least annually — to DIN 14677 and manufacturer guidance. Maintenance log, defect report, audit-ready documentation in Lünen.
Book maintenance in Lünen → identify defects → fixed offer for renovation.
