Abels Brandschutz
Abels Fire Protection Systems
Specialist Contractor for Structural Fire Protection
Request a Quote

Fire-stop penetration seals in Lügde

Lügde needs penetration seals that hold the fire-compartment boundary, pass the inspection, get signed off.

Request walkthrough☎+49 2861 8114387
Wall · ceilingS30 · S60 · S90With penetration plan
Lügde

What a penetration seal achieves.

Penetration seals are DIN-validated closures of wall and ceiling openings. They preserve the fire compartment for the same duration the wall itself is rated for — 30, 60 or 90 minutes. Without a seal, every cable, pipe or duct that crosses the wall becomes a weak point for flames and smoke.

Penetration systems for Lügde.

We combine Promat, Hilti and Würth — system-open, brand-neutral in Lügde.

  1. 01

    Duct fire-stop

    Fire damper or duct seal — coordinated with the concept, integrated into the duct line. Documented in the property log in Lügde.

  2. 02

    Pipe penetration

    Intumescent collar for plastic pipes, mineral wool insulation for steel — system-dependent, per approval, documented in the penetration plan. Specified per approval in Lügde.

  3. 03

    Stock documentation

    Take over multi-brand stock in Lügde, consolidate in the penetration plan, prepare for consultant sign-off. Documented in the property log in Lügde.

  4. 04

    Combined seal

    Cable and pipe in the same opening — Promat combination, Hilti CFS-CT, Würth fire-stop solution. Documented in the property log in Lügde.

  5. 05

    Cable seal in ceiling

    Vertical penetration — usually box-style, accessible from above, expandable for future cables.

  6. 06

    Cable seal in wall

    Classic in Lügde stock: cables through F30/F90 wall, mineral wool with coating or board with collars. Specified per approval in Lügde.

Where we install seals in Lügde.

Plant rooms
Boiler, distribution, transformer — high penetration density, consultant focus. Standard scope in Lügde.
Duct lines
Fire dampers, duct seals — schools, care, offices in Lügde.
Riser shafts
Floor-by-floor sealing — renovation, stock, retrofit in Lügde.
Stock survey
Take over multi-brand stock in Lügde, inspect, transfer into penetration plan, prepare for authorities.
Cable trays
Tray penetrations with box seals or aggregate seals. Standard scope in Lügde.
Stairwell walls
Compartment boundaries with cable and pipe penetrations — mandatory at every building permit in Lügde.

Standards.

  • EN 1366-3
    European classification

    EI rating for penetration seals — used parallel to DIN, EU-recognised.

  • MLAR
    Cable line directive

    Governs electrical line routing in fire protection — applies in NRW.

  • abZ
    Building-authority approval

    Every system carries an approval number — we deliver the documentation in Lügde.

  • DIN 4102-9
    Cable penetration seals

    Defines the S-rating for cable seals in Lügde buildings.

What penetration seals cost in Lügde.

Ranges depend on opening size, density and system. Fixed quote after walkthrough.

  • from €80
    Small cable penetrationSingle cable, S30 with coating
  • €150 – €400
    Standard wall cable sealMineral wool + coating, medium density
  • €300 – €800
    Combined sealCable and pipe in one opening
  • from €600
    Duct fire-stopFire damper installed
  • Fixed price
    Stock survey & penetration planLump-sum after walkthrough in Lügde

Fixed offer after walkthrough in Lügde.

Penetration seals in the region Reg.-Bez. Detmold.

BarntrupLippeSchieder-SchwalenbergLippeBlombergLippeMarienmünsterHöxterSteinheimHöxterExtertalLippe

Fire stops in Lügde — FAQ.

  • At least annually as part of maintenance — and after every cable/pipe change. Maintenance log mandatory in Lügde.

Have your seals checked for Lügde.

Call us — we take over the seal stock in Lügde and continue it.

Request walkthrough☎
Call Directly
+49 2861 8114387
Call+49 2861 8114387