Sliding, folding, sectional and roller gates with T30/T60/T90 in Lippetal — supply, install, maintain, emergency service. Hörmann, Teckentrup, Novoferm.
When a gate fails in Lippetal, the failure mode matters: hold-open magnets each have different replacement cycles. Sectional gates with HGV-pass duty get seal compression. We carry common spares for the gate brands operating across NRW.
Which build we install in Lippetal depends on hall height, wall situation, fire-protection concept and use.
Rolls vertically under the ceiling, with hub mechanics — for HGV passes, workshop access, logistics ramps. Audit-ready in Lippetal.
Electric drives for high cycle counts, accessible operation, alarm coupling in Lippetal stock.
Daily passage through the gate — escape door, workshop use, integrated route.
When space is tight — folds to both sides, common in stock retrofits and wide passages. Audit-ready in Lippetal.
Compact, small format — service counters, gate housings, smaller passages in Lippetal. Documented in the property log in Lippetal.
Logistics classic in Lippetal — wall-parallel, T30 or T90, electric or mechanical.
EI ratings parallel to DIN — required in new build and EU projects.
T30/T60/T90 classification for gates in Lippetal.
Safety requirements for driven gates — closing edge, light grid, obstruction stop.
Every gate with approval number and audit-ready documentation — in Lippetal too.
Heavily dependent on size, build, drive — fixed price after measurement.
Fixed offer after measurement in Lippetal.
At least annually — to DIN 14677 and manufacturer guidance. Maintenance log, defect report, audit-ready documentation in Lippetal.
Book maintenance in Lippetal → identify defects → fixed offer for renovation.
