Kerpen has gates that open and close daily, must hold under fire and cannot fail. Maintenance, renovation, full replacement — we deliver.
Fire-rated gates are DIN-tested closures for halls. They hold back fire and smoke for 30, 60 or 90 minutes — kept open via hold-open devices in normal use, automatically closing on fire alarm, smoke detection or power loss. In Kerpen, this is the typical setup for any compartment-dividing gate in production or logistics.
Which build we install in Kerpen depends on hall height, wall situation, fire-protection concept and use.
Logistics classic in Kerpen — wall-parallel, T30 or T90, electric or mechanical. Audit-ready in Kerpen.
Daily passage through the gate — escape door, workshop use, integrated route. Audit-ready in Kerpen.
When space is tight — folds to both sides, common in stock retrofits and wide passages.
Rolls vertically under the ceiling, with hub mechanics — for HGV passes, workshop access, logistics ramps. Audit-ready in Kerpen.
Electric drives for high cycle counts, accessible operation, alarm coupling in Kerpen stock. Specified per approval in Kerpen.
Compact, small format — service counters, gate housings, smaller passages in Kerpen. Documented in the property log in Kerpen.
Every gate with approval number and audit-ready documentation — in Kerpen too.
Safety requirements for driven gates — closing edge, light grid, obstruction stop.
EI ratings parallel to DIN — required in new build and EU projects.
T30/T60/T90 classification for gates in Kerpen.
Heavily dependent on size, build, drive — fixed price after measurement.
Fixed offer after measurement in Kerpen.
At least annually — to DIN 14677 and manufacturer guidance. Maintenance log, defect report, audit-ready documentation in Kerpen.
Book maintenance in Kerpen → identify defects → fixed offer for renovation.
