Sliding, folding, sectional and roller gates with T30/T60/T90 in Hünxe — supply, install, maintain, emergency service. Hörmann, Teckentrup, Novoferm.
When a gate fails in Hünxe, the failure mode matters: hold-open magnets each have different replacement cycles. Sectional gates with HGV-pass duty get drive wear. We carry common spares for the gate brands operating across NRW.
Which build we install in Hünxe depends on hall height, wall situation, fire-protection concept and use.
Logistics classic in Hünxe — wall-parallel, T30 or T90, electric or mechanical.
Compact, small format — service counters, gate housings, smaller passages in Hünxe.
Electric drives for high cycle counts, accessible operation, alarm coupling in Hünxe stock.
When space is tight — folds to both sides, common in stock retrofits and wide passages. Audit-ready in Hünxe.
Rolls vertically under the ceiling, with hub mechanics — for HGV passes, workshop access, logistics ramps.
Daily passage through the gate — escape door, workshop use, integrated route. Specified per approval in Hünxe.
Safety requirements for driven gates — closing edge, light grid, obstruction stop.
Every gate with approval number and audit-ready documentation — in Hünxe too.
EI ratings parallel to DIN — required in new build and EU projects.
T30/T60/T90 classification for gates in Hünxe.
Heavily dependent on size, build, drive — fixed price after measurement.
Fixed offer after measurement in Hünxe.
For special-use buildings or where the concept demands it — yes. Otherwise hold-open suffices. We recommend per concept and align with the consultant.
Book maintenance in Hünxe → identify defects → fixed offer for renovation.
