Fire claddings for steel beams, timber elements and ventilation ducts in Heimbach. F30, F90 and higher — approved Promatect, Knauf fire systems.
System selection in Heimbach depends on the bauteil and the visibility. Visible steelwork in foyers often get spray-applied systems — they meet F-rating without altering geometry. industrial halls use Promatect plates for cost and speed.
What we install in Heimbach depends on the structure, appearance and construction phase.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam. Documented in the property log in Heimbach.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Heimbach industrial settings. Documented in the property log in Heimbach.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Heimbach. Specified per approval in Heimbach.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Specified per approval in Heimbach.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Heimbach. Specified per approval in Heimbach.
Intumescent coating — for visible steelwork, where boards would interfere visually. Audit-ready in Heimbach.
Every cladding with approval and conformity declaration.
EI ratings for claddings — parallel to DIN, EU-recognised.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Heimbach.
Decades — as long as the component stands, until mechanical damage. Inspection every 5 years recommended.
Survey in Heimbach → board order → install. Documentation audit-ready.
