Abels Brandschutz
Abels Fire Protection Systems
Specialist Contractor for Structural Fire Protection
Request a Quote

Fire-stop penetration seals in Hamm

Sealing what needs to be sealed in Hamm and Kreis Hamm, Stadt. Cable seals, pipe stops, combined penetrations. Soft, hard or mortar seals.

Request walkthrough☎+49 2861 8114387
Promat · Hilti · WürthExisting & newAudit-ready documentation
Hamm

What a penetration seal achieves.

Every wall penetration in Hamm that crosses a fire-compartment boundary needs documentation: system used. Consultants check this every year. Insurers reference it after a loss. A missing seal is the kind of finding that gets cited in damage reports.

Penetration systems for Hamm.

We combine Promat, Hilti and Würth — system-open, brand-neutral in Hamm.

  1. 01

    Cable seal in wall

    Classic in Hamm stock: cables through F30/F90 wall, mineral wool with coating or board with collars. Documented in the property log in Hamm.

  2. 02

    Stock documentation

    Take over multi-brand stock in Hamm, consolidate in the penetration plan, prepare for consultant sign-off. Audit-ready in Hamm.

  3. 03

    Combined seal

    Cable and pipe in the same opening — Promat combination, Hilti CFS-CT, Würth fire-stop solution. Specified per approval in Hamm.

  4. 04

    Duct fire-stop

    Fire damper or duct seal — coordinated with the concept, integrated into the duct line.

  5. 05

    Pipe penetration

    Intumescent collar for plastic pipes, mineral wool insulation for steel — system-dependent, per approval, documented in the penetration plan.

  6. 06

    Cable seal in ceiling

    Vertical penetration — usually box-style, accessible from above, expandable for future cables.

Where we install seals in Hamm.

Stairwell walls
Compartment boundaries with cable and pipe penetrations — mandatory at every building permit in Hamm. Standard scope in Hamm.
Riser shafts
Floor-by-floor sealing — renovation, stock, retrofit in Hamm.
Plant rooms
Boiler, distribution, transformer — high penetration density, consultant focus. Standard scope in Hamm.
Stock survey
Take over multi-brand stock in Hamm, inspect, transfer into penetration plan, prepare for authorities.
Cable trays
Tray penetrations with box seals or aggregate seals.
Duct lines
Fire dampers, duct seals — schools, care, offices in Hamm. Standard scope in Hamm.

Standards.

  • DIN 4102-9
    Cable penetration seals

    Defines the S-rating for cable seals in Hamm buildings.

  • EN 1366-3
    European classification

    EI rating for penetration seals — used parallel to DIN, EU-recognised.

  • abZ
    Building-authority approval

    Every system carries an approval number — we deliver the documentation in Hamm.

  • MLAR
    Cable line directive

    Governs electrical line routing in fire protection — applies in NRW.

What penetration seals cost in Hamm.

Ranges depend on opening size, density and system. Fixed quote after walkthrough.

  • from €80
    Small cable penetrationSingle cable, S30 with coating
  • €150 – €400
    Standard wall cable sealMineral wool + coating, medium density
  • €300 – €800
    Combined sealCable and pipe in one opening
  • from €600
    Duct fire-stopFire damper installed
  • Fixed price
    Stock survey & penetration planLump-sum after walkthrough in Hamm

Fixed offer after walkthrough in Hamm.

Penetration seals in the region Reg.-Bez. Arnsberg.

BönenUnnaAhlenWarendorfWelverSoestWerlSoestWerneUnnaBergkamenUnna

Fire stops in Hamm — FAQ.

  • Yes — as long as each position has an approval and the documentation is consistent. We take over stock brand-neutrally.

Have your seals checked for Hamm.

Walkthrough in Hamm → defect list → fixed offer.

Request walkthrough☎
Call Directly
+49 2861 8114387
Call+49 2861 8114387