Fire-stop penetration seals in Halver

Halver needs penetration seals that hold the fire-compartment boundary, pass the inspection, get signed off.

Wall · ceilingS30 · S60 · S90With penetration plan
Halver

What a penetration seal achieves.

An F90-rated wall in Halver loses its function the moment a cable, pipe or duct passes through it unprotected. Only the approved penetration seal restores that fire resistance — and only if the system used matches the pipe type.

Penetration systems for Halver.

The system depends on opening size, occupancy density and wall type.

  1. 01

    Cable seal in wall

    Classic in Halver stock: cables through F30/F90 wall, mineral wool with coating or board with collars. Documented in the property log in Halver.

  2. 02

    Stock documentation

    Take over multi-brand stock in Halver, consolidate in the penetration plan, prepare for consultant sign-off. Audit-ready in Halver.

  3. 03

    Cable seal in ceiling

    Vertical penetration — usually box-style, accessible from above, expandable for future cables. Documented in the property log in Halver.

  4. 04

    Combined seal

    Cable and pipe in the same opening — Promat combination, Hilti CFS-CT, Würth fire-stop solution.

  5. 05

    Pipe penetration

    Intumescent collar for plastic pipes, mineral wool insulation for steel — system-dependent, per approval, documented in the penetration plan. Documented in the property log in Halver.

  6. 06

    Duct fire-stop

    Fire damper or duct seal — coordinated with the concept, integrated into the duct line.

Where we install seals in Halver.

Stock survey
Take over multi-brand stock in Halver, inspect, transfer into penetration plan, prepare for authorities.
Stairwell walls
Compartment boundaries with cable and pipe penetrations — mandatory at every building permit in Halver. Standard scope in Halver.
Riser shafts
Floor-by-floor sealing — renovation, stock, retrofit in Halver.
Plant rooms
Boiler, distribution, transformer — high penetration density, consultant focus. Standard scope in Halver.
Cable trays
Tray penetrations with box seals or aggregate seals. Standard scope in Halver.
Duct lines
Fire dampers, duct seals — schools, care, offices in Halver. Standard scope in Halver.

Standards.

  • EN 1366-3
    European classification

    EI rating for penetration seals — used parallel to DIN, EU-recognised.

  • MLAR
    Cable line directive

    Governs electrical line routing in fire protection — applies in NRW.

  • DIN 4102-9
    Cable penetration seals

    Defines the S-rating for cable seals in Halver buildings.

  • abZ
    Building-authority approval

    Every system carries an approval number — we deliver the documentation in Halver.

What penetration seals cost in Halver.

Ranges depend on opening size, density and system. Fixed quote after walkthrough.

  • from €80
    Small cable penetrationSingle cable, S30 with coating
  • €150 – €400
    Standard wall cable sealMineral wool + coating, medium density
  • €300 – €800
    Combined sealCable and pipe in one opening
  • from €600
    Duct fire-stopFire damper installed
  • Fixed price
    Stock survey & penetration planLump-sum after walkthrough in Halver

Fixed offer after walkthrough in Halver.

Fire stops in Halver — FAQ.

  • A penetration plan documents every seal in the building — location, system, date, installer. Mandatory for public buildings, special-use, larger properties in Halver.

Have your seals checked for Halver.

Walkthrough in Halver → defect list → fixed offer.

Call+49 2861 8114387