Fire-rated gates in Gladbeck

Fire gates for logistics, production, warehouses, workshops and underground parking in Gladbeck.

Sliding · folding · sectionalT30 · T60 · T90With maintenance
Gladbeck

What a fire gate delivers.

Fire-rated gates are DIN-tested closures for warehouses. They close fire compartments for 30, 60 or 90 minutes — kept open via hold-open devices in normal use, automatically closing on fire alarm, smoke detection or power loss. In Gladbeck, this is the typical setup for any compartment-dividing gate in production or logistics.

Fire gates for Gladbeck.

Which build we install in Gladbeck depends on hall height, wall situation, fire-protection concept and use.

  1. 01

    With personnel door

    Daily passage through the gate — escape door, workshop use, integrated route.

  2. 02

    With drive

    Electric drives for high cycle counts, accessible operation, alarm coupling in Gladbeck stock. Documented in the property log in Gladbeck.

  3. 03

    Sliding gate

    Logistics classic in Gladbeck — wall-parallel, T30 or T90, electric or mechanical.

  4. 04

    Roller gate

    Compact, small format — service counters, gate housings, smaller passages in Gladbeck.

  5. 05

    Folding gate

    When space is tight — folds to both sides, common in stock retrofits and wide passages.

  6. 06

    Sectional gate

    Rolls vertically under the ceiling, with hub mechanics — for HGV passes, workshop access, logistics ramps.

Where fire gates are installed in Gladbeck.

Underground parking
Gate between parking and stairwell — mandatory and concept-defined in Gladbeck.
Production
Compartment gates in production halls — fire-resistant, chemical-resistant, with drive in Gladbeck industry.
Workshop
Gate between workshop and storage — T30 or T90 with personnel door, retrofit-friendly.
Logistics hall
T30/T90 gates between storage zones — high cycle, alarm-linked, in maintenance contract.
High-bay storage
Gates between high-rack zones — high demands, special build, consultant-supervised. Standard scope in Gladbeck.
Gate house
Roller gate with fire function — small, retrofit-friendly, maintainable.

Standards.

  • DIN EN 16005
    Power-operated doors

    Safety requirements for driven gates — closing edge, light grid, obstruction stop.

  • abZ
    Building approval

    Every gate with approval number and audit-ready documentation — in Gladbeck too.

  • EN 13501-2
    EU classification

    EI ratings parallel to DIN — required in new build and EU projects.

  • DIN 4102-5
    Fire resistance

    T30/T60/T90 classification for gates in Gladbeck.

What a fire gate costs in Gladbeck.

Heavily dependent on size, build, drive — fixed price after measurement.

  • from €4,500
    Small T30 sliding gateUp to 3 m wide, manual, fitted
  • €8,000 – €15,000
    Large T30/T90 sliding gateLogistics width, with drive, hold-open
  • €10,000 – €20,000
    Sectional gate T30HGV pass, with drive
  • from €12,000
    T90 with alarm couplingAlarm-linked release
  • Fixed price
    Annual maintenance contract€200–€500 per gate per year

Fixed offer after measurement in Gladbeck.

Fire gates in Gladbeck — FAQ.

  • Yes — multi-brand stock, fix defects, take into maintenance contract, document in stock plan in Gladbeck.

Have fire gates checked in Gladbeck.

Book maintenance in Gladbeck → identify defects → fixed offer for renovation.

Call+49 2861 8114387