Load-bearing structures keep their fire-resistance rating through approved board claddings, fire-protective coatings or mineral-wool build-ups — installed in Eslohe and Region Reg.-Bez. Arnsberg.
Unlike fire doors or seals, claddings don't form compartments — they buffer temperature. The steel beam, the duct, the timber stays load-bearing under fire for the defined duration. In Eslohe, this matters most in public buildings where a beam collapse means a section collapse.
What we install in Eslohe depends on the structure, appearance and construction phase.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Eslohe.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Eslohe. Audit-ready in Eslohe.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam. Specified per approval in Eslohe.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Audit-ready in Eslohe.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Eslohe industrial settings.
Intumescent coating — for visible steelwork, where boards would interfere visually. Documented in the property log in Eslohe.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
EI ratings for claddings — parallel to DIN, EU-recognised.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
Every cladding with approval and conformity declaration.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Eslohe.
Yes — F30/F90 retrofit-able, cladding around existing components, in occupied rooms in Eslohe.
Survey in Eslohe → board order → install. Documentation audit-ready.
