Fire claddings for steel beams, timber elements and ventilation ducts in Erkelenz. F30, F90 and higher — approved Promatect, Knauf fire systems.
Fire claddings are coated build-ups that protect load-bearing components from heating for 30 to 120 minutes. The cladding turns an bare duct into an properly rated structural element.
What we install in Erkelenz depends on the structure, appearance and construction phase.
Intumescent coating — for visible steelwork, where boards would interfere visually. Audit-ready in Erkelenz.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Erkelenz. Audit-ready in Erkelenz.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Erkelenz. Specified per approval in Erkelenz.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Erkelenz industrial settings.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam. Audit-ready in Erkelenz.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
EI ratings for claddings — parallel to DIN, EU-recognised.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
Every cladding with approval and conformity declaration.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Erkelenz.
Decades — as long as the component stands, until mechanical damage. Inspection every 5 years recommended.
Survey in Erkelenz → board order → install. Documentation audit-ready.
