Every cladding with approval and conformity declaration.
Fire claddings are board constructions that protect timber elements from heating for 30 to 120 minutes. The cladding turns an combustible timber into an F30/F90-compliant component.
Fire-protective claddings in Engelskirchen
Load-bearing structures keep their fire-resistance rating through approved board claddings, fire-protective coatings or mineral-wool build-ups — installed in Engelskirchen and Region Regierungsbezirk Köln.
What fire cladding does.
Cladding types for Engelskirchen.
What we install in Engelskirchen depends on the structure, appearance and construction phase.
- 01
Fire-protective coating
Intumescent coating — for visible steelwork, where boards would interfere visually.
- 02
Duct cladding
Promatect-L or equivalent — fully enclosing the duct, per approval, in Engelskirchen industrial settings.
- 03
Timber beam protection
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Engelskirchen. Documented in the property log in Engelskirchen.
- 04
Steel beam F30/F90
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam. Documented in the property log in Engelskirchen.
- 05
Shaft cladding
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Engelskirchen. Audit-ready in Engelskirchen.
- 06
Sprayed plaster
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Documented in the property log in Engelskirchen.
Where we cladding in Engelskirchen.
- Duct lines
- Ventilation ducts in school, care, office buildings in Engelskirchen — F90 cladding all-round.
- Timber ceiling
- Stock cladding for timber-beam ceilings — F30/F60 underside in Engelskirchen stock.
- Lift shaft
- F90 shaft wall with cladding — for stock renovation, top-up storeys, new build in Engelskirchen.
- Service shaft
- Heating, sewage, ventilation shaft — F90 cladding with inspection openings. Standard scope in Engelskirchen.
- Stairwell structure
- Steel staircases with F30 cladding — in stock, new build, as renovation measure.
- Hall load-bearing
- Steel beams in logistics and production halls in Engelskirchen — F30 to F90 per concept, audit-ready.
Standards.
- abZBuilding-authority approval
- DIN 4102-4Components under fire
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
- MLARCable line directive
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
- EN 13501-2EU classification
EI ratings for claddings — parallel to DIN, EU-recognised.
What fire claddings cost in Engelskirchen.
Heavily dependent on component and area — fixed price after survey.
- from €60/mSteel beam F30 board claddingPer linear metre, three-sided
- €120 – €250/m²Duct cladding F90All-round, in line
- from €80/m²Shaft wall F90Lift shaft / service
- Fixed priceTimber-beam upgradeLump-sum after walkthrough in Engelskirchen
- On requestFire-protective coatingPer m² visible area, intumescent
Fixed offer after survey in Engelskirchen.
Claddings in Engelskirchen — FAQ.
Yes — F30/F90 retrofit-able, cladding around existing components, in occupied rooms in Engelskirchen.
Plan claddings for Engelskirchen.
Survey in Engelskirchen → board order → install. Documentation audit-ready.