Fire-rated gates in Detmold

Fire gates for logistics, production, warehouses, workshops and underground parking in Detmold.

Sliding · folding · sectionalT30 · T60 · T90With maintenance
Detmold

What a fire gate delivers.

Fire-rated gates are building-authority-approved closures for warehouses. They hold back fire and smoke for 30, 60 or 90 minutes — kept open via hold-open devices in normal use, automatically closing on fire alarm, smoke detection or power loss. In Detmold, this is the typical setup for any compartment-dividing gate in production or logistics.

Fire gates for Detmold.

Which build we install in Detmold depends on hall height, wall situation, fire-protection concept and use.

  1. 01

    With drive

    Electric drives for high cycle counts, accessible operation, alarm coupling in Detmold stock. Documented in the property log in Detmold.

  2. 02

    Sectional gate

    Rolls vertically under the ceiling, with hub mechanics — for HGV passes, workshop access, logistics ramps. Audit-ready in Detmold.

  3. 03

    Roller gate

    Compact, small format — service counters, gate housings, smaller passages in Detmold. Documented in the property log in Detmold.

  4. 04

    Sliding gate

    Logistics classic in Detmold — wall-parallel, T30 or T90, electric or mechanical. Audit-ready in Detmold.

  5. 05

    With personnel door

    Daily passage through the gate — escape door, workshop use, integrated route.

  6. 06

    Folding gate

    When space is tight — folds to both sides, common in stock retrofits and wide passages.

Where fire gates are installed in Detmold.

Logistics hall
T30/T90 gates between storage zones — high cycle, alarm-linked, in maintenance contract. Standard scope in Detmold.
Underground parking
Gate between parking and stairwell — mandatory and concept-defined in Detmold. Standard scope in Detmold.
High-bay storage
Gates between high-rack zones — high demands, special build, consultant-supervised. Standard scope in Detmold.
Production
Compartment gates in production halls — fire-resistant, chemical-resistant, with drive in Detmold industry.
Workshop
Gate between workshop and storage — T30 or T90 with personnel door, retrofit-friendly. Standard scope in Detmold.
Gate house
Roller gate with fire function — small, retrofit-friendly, maintainable. Standard scope in Detmold.

Standards.

  • EN 13501-2
    EU classification

    EI ratings parallel to DIN — required in new build and EU projects.

  • DIN 4102-5
    Fire resistance

    T30/T60/T90 classification for gates in Detmold.

  • abZ
    Building approval

    Every gate with approval number and audit-ready documentation — in Detmold too.

  • DIN EN 16005
    Power-operated doors

    Safety requirements for driven gates — closing edge, light grid, obstruction stop.

What a fire gate costs in Detmold.

Heavily dependent on size, build, drive — fixed price after measurement.

  • from €4,500
    Small T30 sliding gateUp to 3 m wide, manual, fitted
  • €8,000 – €15,000
    Large T30/T90 sliding gateLogistics width, with drive, hold-open
  • €10,000 – €20,000
    Sectional gate T30HGV pass, with drive
  • from €12,000
    T90 with alarm couplingAlarm-linked release
  • Fixed price
    Annual maintenance contract€200–€500 per gate per year

Fixed offer after measurement in Detmold.

Fire gates in Detmold — FAQ.

  • Emergency line — weekday-reachable, first measure by phone, on site within 24 h or by arrangement to Detmold.

Have fire gates checked in Detmold.

Book maintenance in Detmold → identify defects → fixed offer for renovation.

Call+49 2861 8114387