Sliding, folding, sectional and roller gates with T30/T60/T90 in Bünde — supply, install, maintain, emergency service. Hörmann, Teckentrup, Novoferm.
Fire-rated gates are DIN-tested closures for industrial floors. They protect escape routes for 30, 60 or 90 minutes — kept open via hold-open devices in normal use, automatically closing on fire alarm, smoke detection or power loss. In Bünde, this is the typical setup for any compartment-dividing gate in production or logistics.
Which build we install in Bünde depends on hall height, wall situation, fire-protection concept and use.
Rolls vertically under the ceiling, with hub mechanics — for HGV passes, workshop access, logistics ramps.
Electric drives for high cycle counts, accessible operation, alarm coupling in Bünde stock. Specified per approval in Bünde.
Daily passage through the gate — escape door, workshop use, integrated route. Specified per approval in Bünde.
Compact, small format — service counters, gate housings, smaller passages in Bünde. Specified per approval in Bünde.
When space is tight — folds to both sides, common in stock retrofits and wide passages.
Logistics classic in Bünde — wall-parallel, T30 or T90, electric or mechanical. Documented in the property log in Bünde.
T30/T60/T90 classification for gates in Bünde.
EI ratings parallel to DIN — required in new build and EU projects.
Every gate with approval number and audit-ready documentation — in Bünde too.
Safety requirements for driven gates — closing edge, light grid, obstruction stop.
Heavily dependent on size, build, drive — fixed price after measurement.
Fixed offer after measurement in Bünde.
At least annually — to DIN 14677 and manufacturer guidance. Maintenance log, defect report, audit-ready documentation in Bünde.
Book maintenance in Bünde → identify defects → fixed offer for renovation.
