Cladding steelwork, lining ventilation ducts, retrofitting load-bearing structures in Bergheim. Boards, coatings, mineral-wool systems.
System selection in Bergheim depends on the bauteil and the visibility. Visible steelwork in foyers often get intumescent coatings — they meet F-rating without altering geometry. industrial halls use Promatect plates for cost and speed.
What we install in Bergheim depends on the structure, appearance and construction phase.
Board cladding with Promatect or Knauf — three-sided or four-sided box around the beam.
Intumescent coating — for visible steelwork, where boards would interfere visually. Specified per approval in Bergheim.
F30/F60 cladding for existing ceilings — for top-ups, renovation, stock protection in Bergheim.
Sprayable, for large-area load-bearing structures in industrial halls where appearance is secondary. Documented in the property log in Bergheim.
Promatect-L or equivalent — fully enclosing the duct, per approval, in Bergheim industrial settings. Specified per approval in Bergheim.
Lift shafts or service shafts — F90 outside, F30 inside, per concept in Bergheim.
Governs cladding of cable routes — alongside penetration plans, in stock documentation, in new build.
Every cladding with approval and conformity declaration.
EI ratings for claddings — parallel to DIN, EU-recognised.
F30/F90/F120 classification — the foundation, building-authority recognised, in stock and new build.
Heavily dependent on component and area — fixed price after survey.
Fixed offer after survey in Bergheim.
Decades — as long as the component stands, until mechanical damage. Inspection every 5 years recommended.
Survey in Bergheim → board order → install. Documentation audit-ready.
